Dual Band repeater
Does the signal of your wireless network not reach your sofa or garden seat? The EM4597 Concurrent AC1200 Dual Band WiFi Repeater increases the wireless network coverage of your wireless router on the 2.4 GHz and 5GHz band. When using the 5GHz frequency you will face less interferences because the band is less crowded and involves hardly any failures.
Crossband technology: get the highest speed possible
The EM4597 Concurrent Dual Band WiFi Repeater is using the Crossband technology. This technology uses different bands for sending and receiving data packages. For example: the 2.4GHz band is used for the communication between the router and repeater. The communication between the repeater and mobile devices (laptops, tablets and smartphones) is using the 5GHz band. You will get the maximum possible speed!
Upgrade your Single Band network to a Dual Band network
When your 2.4GHz network is suffering from many interferences, it is useful to use the 5GHz band. Do you own a Single Band router? The EM4597 Concurrent AC1200 Dual Band WiFi Repeater upgrades your Single Band router to a Dual Band Router. The EM4597 WiFi Repeater receives the 2.4GHz band from your current router and converts it to both a 2.4GHz and 5GHz output.
WiFi signal indicator
Do you find it difficult to find the right location for the repeater? The EM4597 has a special WiFi signal indicator which helps you to find the best location for the repeater.
Easy setup via WPS button and installation wizard
The EM4597 supports WPS (WiFi Protected Setup). Installing the repeater is very easy. First, press the WPS button on your router. Then, press the WPS button on the Dual Band WiFi Repeater. Do you prefer installing the repeater manually? The installation wizard guides you through the installation process. You can even use your tablet and smartphone. How easy is that?
Works with any wireless router
The EM4597 Concurrent WiFi Repeater uses the AC1200 standard, but the repeater is backwards compatible with the 300N standard which is commonly used on all routers. This makes the Concurrent Dual Band WiFi Repeater universally applicable.
Usable as access point
The EM4597 WiFi Repeater can function as a Dual Band access point. An access point converts a wired network connection into a wireless signal. You are able to make use of a WiFi signal in places you normally could use a wired connection only.
Two additional network ports
The EM4597 can also be used as a wireless bridge: wired connection for two devices to the network without wiring your home. Additionally, the Concurrent AC1200 Dual Band WiFi Repeater can function as an access point and router too.
- This product does not depend on your operating system
- 2 YEAR WARRANTY
- Network mode: Repeater, Router and Access Point mode
- Network interface:
- 1x WAN/LAN 10/100Mbps Ethernet LAN port
- 1x LAN 10/100Mbps Ethernet LAN port
- Wi-Fi: 300Mbps on 2.4GHz band and 867Mbps on 5GHz band simultaneously
- Complies with IEEE 802.11b/g/n for 2.4GHz band
- Complies with IEEE 802.11ac/a/n for 5GHz band
- Supports WPS: functionality by WPS button
- Security: WEP, WPA and WPA2 wireless security
- Chipset: MT7628A+MT7612E
- Antenna: 2 x 3dbi internal antenna
- Configuration: Webbased
- Dimensions : 60 (W) x 100 (H) x 90 (D) mm
- Weight : 94 g
- Supply voltage range : 100-240~ (50/60 Hz)
- Power Consumption : 3W
Media in TabConcurrent AC1200 Dual Band WiFi Repeater
Download and Support
FaqsFrequently asked questions
DriversA driver is not required for this product.
ManualsEU Declaration of conformity
Quick Install Guide